First we have our “Parts Cleaner”. If you have a machine shop or pressure washer repair side of your business you most likely use a parts cleaner of some kind to remove oil, dirt and the like from motors parts and such. Actually we sell the most of this cleaner to mechanics that have nothing to do with pressure washing but have cycle and small engine shops like lawn motor repair.
This product comes as a powder, sold in 25 or 100 lb increments and is used at one lb per 5 gallons of water. This mixture for use in hot dip tanks usually set at 110 to 180 degrees. This heavy duty alkaline cleaner cleans ferrous and non-ferrous metal parts of oils, grease, soils and other debris.
Our next product “Phos-tize HD” is also used primarily in motor cycle or machine shops. This liquid is a heavy duty hot degreasing and de-rusting compound that is also used in hot water, high pressure washers, steam cleaners and in hot dip tanks. Dilution can be a little as 2% and up, and will leave metals rain bowed, blued and prepared for re-assembly and painting.
This next product is one used by commercial building maintenance companies and the like. Our “Non Acid Aluminum Coil Cleaner” is a great new “Green” solution to the old acid versions that are being phased out of use. This liquid product is used in the cleaning of air conditioner, evaporator and condenser coils at a rate of 1:4 cleaner to water, but it can be diluted up to, but no more than, 1:40 in some applications. Coil cleaning is a necessary service that should be done at least once if not twice a year or quarterly depending on the equipment, environmental factors and time of use the equipment is in operation. The more the use, the more frequent the cleaning needs to be. With this being a non acid “Green” product, operator safety and client concerns to maintain new “Green” building initiatives can be fulfilled.
Another non acid product is our “Drain Opener” that is also for commercial building use. This liquid product will dissolve and liquefy hair, paper and grease found in commercial floor and sink drains in bathrooms, kitchens, and restaurants that empty in to sewer drains. Not for use in out side water drains that flow into storm drain systems. Do not use on aluminum, or pore through aluminum drain covers or catch strainer baskets. Remove cover and/or strainer before using product and replace after cleaning is done. Not for home use.
Also for cleaning drains as a maintenance type product is our “QwicZyme”. This has biological action to break down food wastes, grease and other organic matter in drains and pipe systems that cause clogs. QwicZyme deprives odor causing bacteria of their food source, thus inhibiting their growth and ability to produce obnoxious odors. This can be used indoors or out in any free flowing drain and is safe for disposals and septic tanks. Warm water must first be added to the drain and pipes to increase the temperature before using to activate the QwicZyme to work. Once added to the drain and pipes QwicZyme should be left to stand over night in the trap and pipes before flushing with fresh water. Treatment is 1 quart per 25 cubic foot of pipe and it is suggested to be used weekly for optimum free drain flow performance.
Information on these and the rest of our regular Industrial Degreasers link here to our web site.