Follow Us

Soap Warehouse Blog

Dyn-O-Coil - mineral scale prevention

Posted by Linda Chambers on Tue, Jan 15, 2019 @ 10:00 AM

Dyn-O-Coil is a dynamic mineral scale preventer and removal system. Dyn-O-Coil's ingredients modify the normal crystal structure of mineral hardness so that scale build up never forms inside the pump, on coils, in valves, hoses, wands or nozzles of your equipment. It will not harm any machine part including seals and packing.


If you have to use hard water when you are washing then using Dyn-O-Coil occasionally is insurance for your equipment.

Use Dyn-O-Coil starting at 1/2 ounce per gallon of soap mix. Dyn-O-Coil will also remove pre-existing scale with each use, dissolving it over time. Dyn-O-Coil is non hazardous, biodegradable, easy to use. Works while you work.

For Preventive Use: Premix 1 quart (32 oz.) into 54.75 gallons of water in a 55 gallon drum and inject through machine as normal.

For Pre-existing Scale Use: Premix 1 gallon into 54 gallons of water in a 55 gallon drum. Then use water as normal.

For Soap Treatment: Premix 1 pint (16 oz.) per 55 gallons of soap or 1/2 oz. per gallon.

You can use Dyn-O-Coil in both the soap and the water at the same time without issue and for better results.

If scale buildup is already sever consider using Super Coil Descaler before starting a Dyn-O-Coil prevention plan.

Dyn-O-Coil 1 gallon $15.00

Dyn-O-Coil 5 gallon $65.00


Tags: Dyn-O-Coil, GCE

Sign up for Newsletter by Email

Latest Posts

Posts by category